Dwyer Instruments, Inc., the preferred source for your complete range of practical and affordable instrumentation, is announcing the release of its NEW SERIES WMT MULTI-JET WATER METER WITH PULSE OUTPUT.

The Series WMT Multi-Jet Water Meters with Pulse Output are ideal for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges, even in low flow applications. The meter is designed for long service life and relatively maintenance-free operation, even under adverse conditions. The magnetically driven, hermetically sealed resistor will not leak or fog and is completely separated from the register system and water. The reed switch is activated by a magnet on the dial which is directly proportional to the flow rate. The output is prefect for remote monitoring of flow rate or flow totalization and can interface with PLC's, counters, data loggers, and SCADA systems.

Complete details are available on our website http://www.dwyer-inst.com/Products/Product.cfm?Group_ID=20109

The MC style electromagnetic clutches from Ogura Industrial Corp. are available with custom shafts to meet your application requirements. Shafts are normally provided in 400 series stainless but other materials are available. The MC series clutches on these shafts are typically ball bearing mounted for both the field assembly and the timing pulley input providing long life. Various input timing pulleys are available.

Shaft ends can be configured to meet customer requirements such as D flats and snap ring grooves. Rollers, bearings and bearing supports can also be provided to meet customer requirements. These preassembled sub assemblies make it easier and faster for customers to build their machines. Primary applications for these sub assemblies are for document handling in business and office machinery.

Theses clutches are only a small part of over 3,000 different clutch models that Ogura has available. If this clutch does not meet your needs please contact us at 732-271-7361 and we will assist you in finding one that does or if you prefer please visit our website at www.ogura-clutch.com for immediate information.

October 23, 2009, Barrington, N.J. - Edmund Optics (EO), the premier provider of optical components, presents their new Continuously Variable Apodizing Filters, which are used to eliminate undesirable intensity variations and create an even illumination profile in an optical system. The filter's density can either increase or decrease radially from light to dark or dark to light. The company offers both Bull's Eye and Reverse Bull's Eye Type Filters in two standard diameters that are in-stock and available for immediate delivery, saving time and prototyping costs.

Reverse Bull's Eye improves dynamic range in imaging systems

Edmund Optics' Bull's Eye type filters feature a high optical density in the center, which decreases continuously to an uncoated edge. These are commonly used to flatten the intensity profile of Gaussian beams. The EO Reverse Bull's Eye type filter features a high optical density coating on the edge of the filter, which increases continuously to an uncoated center. Reverse Bull's Eye type filters are ideal for improving the dynamic range in imaging systems.

Off-the-shelf filters allow fast turnaround with excellent cost savings

EO's standard Bull's Eye type filters are available in 25 and 50 mm diameters with end densities of 1.0 and 2.0. They are manufactured using a B270 substrate to a dimensional tolerance of +0.00/-0.20, a surface quality of 60-40 and a thickness of 1.50 +0.10. The filters are ideally suited for a design wavelength range of 400-700 nm. A wide variety of custom substrates, sizes or intensity profiles are also available by contacting EO's Sales Department.

Olympus is pleased to announce the introduction of the new IPLEX LX and IPLEX LT industrial videoscopes. These new small and lightweight videoscopes, which are used for a wide range of remote visual inspections of parts or structures where access is limited, offer portability, ease of use, durability, and a host of practical features.

The IPLEX LX and LT are the most compact and lightweight of the IPLEX systems. They are one-third the size and approximately half the weight (2.7 kg, including battery) of the IPLEX FX, the most recent Olympus videoscope introduced. The reason for this small size is that the LCD monitor is built into a main operating unit that is just 64 mm width (2.5 in.) excluding the handle. The LCD monitor uses a large 6.5-inch screen with low ambient reflection, permitting accurate inspection even outdoors in direct sunlight. The size and weight makes the new IPLEX units ideal for applications where operator access is limited, such as inside boiler rooms, airplane fuselages, or wind turbine gear boxes.

The IPLEX LX and LT provide rugged durability in harsh environments. They comply with IP55 standards and with United States Defense Standards MIL-STD-810F, Method 510.4/506.4 for resistance to dust and rain, and with MIL-STD-810F, Method 516.5 for the 1.2-meter drop test. They can be operated safely in many difficult field environments and in dusty or sandy conditions.

The IPLEX LX and LT can be operated by users of any experience level. Almost every menu and feature can be accessed by a maximum of three presses of the quick-access buttons on the ergonomic lightweight handset with power-assist TrueFeel™ scope articulation control. The display features an intuitive icon-based menu that makes it easy for the operator to quickly select the right menu option.

Although small in size, the IPLEX LX and IPLEX LT do not compromise performance or functionality. They provide excellent color reproduction and superb clarity on the industry-leading 6.5 in. daylight-view monitor that allows detection of very small defects. The IPLEX LX also features the unique WiDER™ (Wide Dynamic Extended Range) image processing capability that brings out detail in shadowed and highlighted areas to produce bright, contrast-balanced images across the entire depth of field. For optimum magnification, the new units offer a comprehensive range of interchangeable optical tip adapters. The integrated LED system fitted within the optical tip adapter delivers vivid illumination regardless of scope length and eliminates the need for a fiber light guide. In addition, the unique SmartTip™ feature permits recording of adapter information along with captured images for inspection traceability, ease of set up, and confirmation of tip security.

The IPLEX LX and LT also offer far more than just on-site inspection. From image archiving to defect measurement and image management on a PC, post-inspection tasks are made easier. They feature high-quality JPEG still images and MPEG-4 movies that record directly to a removable USB flash drive. Saving or retrieving images requires a single button press while the thumbnail view allows instant review of inspection results. The free of charge IPLEX Viewer-Plus software features image data management and precise measurement (or re-measurement) of objects in recorded images. The IPLEX LX will soon offer the advanced Olympus-pioneered Stereo Measurement technology that enables high-resolution image capture with two parallax lenses, permitting accurate measurement of almost any object from any angle.

With the introduction of the IPLEX LX and IPLEX LT industrial videoscopes, Olympus is setting a new standard in Remote Visual Inspections (RVI). It is the combination of superb ease of use with outstanding functionality that makes these small and lightweight units a valuable asset for inspectors who need a videoscope that is both affordable and practical.

Dwyer Instruments, Inc., the preferred source for your complete range of practical and affordable instrumentation, is announcing the release of its NEW SERIES VTT HOT-WIRE AIR VELOCITY/TEMPERATURE TRANSMITTER designed for HVAC applications that require both velocity and temperature monitoring.

            The Series VTT Hot-wire Air Velocity and Temperature Transmitter provides sensing for both air velocity and temperature, simplifying greatly installation time by eliminating the need to supply two separate components. The VTT offers field-selectable velocity and temperature ranges in English (FPM, °F) or metric (m/s, °C) units with maximums up to 6000 FPM (30 m/s) and 212°F (100°C). The units are available with or without an LCD display and are available in either a duct mount or remote probe with cable installations. The VTT is a useful transmitter for many common HVAC applications.

Complete details are available on our website @ http://www.dwyer-inst.com/Products/Product.cfm?Group_ID=20096

Southampton, PA -- Silbrade silicone hose from NewAge® Industries offers a unique combination of performance properties for fluid transfer applications. Typical uses include chemical feed, bottle filling, deionized water transfer, food handling, beverage service, viscous material handling, laboratory, resin feeds, and adhesive lines. It is also used as protective jacketing.

Flexible Silbrade hose is reinforced for higher pressure applications and resistant to temperature variations. Its construction -- open mesh polyester braiding incorporated within walls of silicone tubing -- enables its use in pressure applications that unreinforced tubing often cannot handle. Silbrade's construction also allows excellent bend radii and restricted space usage without impeding flow. The hose handles steady or fluctuating temperatures between -80°F and 350°F (-62°C and 176°C).

Silicone hose has long been used in the medical field, as it meets that industry's requirements for non-toxicity. Its other properties make it well suited for industries such as food and beverage, chemical, appliance, computer, and more recently, alternative energy. Silbrade is made from FDA-sanctioned ingredients and is listed by the National Sanitation Foundation for use with food equipment materials (NSF 51). It is odorless, tasteless, unaltered by the effects of weather, and generally exhibits inertness toward U.V., radiation, and ozone.

Silbrade is a peroxide-cured product manufactured in a controlled environment for cleanliness. The hose is stocked in nine sizes from 1/8" through 1" I.D.; other sizes are available through custom order. Additional customization includes cut-to-length pieces, colors, and hardnesses. Medical-grade Silbrade is stocked, as well as unreinforced silicone tubing and silicone suction hose. A platinum-cured version is available through NewAge's AdvantaPure® products division.

For more information on Silbrade silicone hose, contact the Fluid Transfer Specialists® at NewAge Industries, Inc., 145 James Way, Southampton, PA 18966; phone 800-50-NEWAGE (800-506-3924) or 215-526-2300; fax 800-837-1856 or 215-526-2190; e-mail: info@newageindustries.com: or view the product-specific web page at http://www.newageindustries.com/slbrd.asp

About NewAge Industries and AdvantaPure

In business since 1954, NewAge Industries manufactures and fabricates thermoplastic and thermoset tubing and hose. The company offers one of the broadest product lines of tubing, hose, and fittings in the U.S., and its custom extrusion and fabrication services are unrivaled. NewAge Industries maintains a large inventory and prides itself on same-day shipment of 98% of orders for its core product lines. In 2006, NewAge initiated an ESOP (Employee Stock Ownership Plan) for the benefit of both its employees and customers.

The AdvantaPure division of NewAge Industries specializes in clean products for the pharmaceutical, biomedical, food, beverage, chemical, and cosmetic industries. All products are manufactured, stored, and shipped using the cleanest methods possible to ensure unsurpassed product purity.

The prime misting/fogging season is a bit away, but planning and building equipment for the season is just getting underway.  The 1CX is one pump your equipment cannot live without. 

The new 1CX high pressure, misting pump is an ultra compact, space saver for both portable and stationary misting applications.   This industrial quality misting pump is ideal for any portable fan unit, outdoor public eating and recreation misting,  cattle feeding-shelter misting or nursery moisture control.

These dependable 1CX misting pumps are available in three performances: 1CX013ELS.MIST [ .13 GPM], 1CX025ELS.MIST [ .25 GPM]or 1CX05ELS.MIST [.50 GPM] with pressure up to 1000 PSI to accommodate a variety of nozzles for the optimum coverage in any misting system.

Each pump can be fitted with either a ¼ HP or ½ HP single phase motor with capacitors for an ultra compact pumping unit.

Features and Benefits

• Four-position head mounting to meet the plumbing flexibility needs of any OEM equpment design
• Industrial stacked valves, forged brass manifold and solid ceramic plungers offer long-life and dependability 
• Compact brass pressure regulator offers precision pressure setting, overpressure protection and servicability
• Smallest footprint with 3.5 pound pump or 20 pound pump-motor for an ultra-compact or portable installation

Typical Applications

• Evaporative Cooling
• Insect Control
• Moisture Control
• Dust Suppression
• Odor Control
• Greenhouse Misting
• Chemical Metering
•  Humidity Control
• Temperature Control
• Visual Effects

Wildeck Introduces New Trackgard™ Overhead Door Track Protectors for Loading Docks

Strong structural steel design protects vertical tracks from damage due to fork truck or heavy cart impact.

Waukesha, WI - September 2009, Wildeck, Inc. - To continue its expansion in the area of plant safety products, Wildeck has introduced a rugged new line of Trackgard™ door track protectors that resist forklift, hand truck, or heavy cart impact and protect vital overhead door rails from damage.

“We’ve avoided costly repairs and downtime by installing Trackgard™ protectors in our manufacturing facility,” stated Hue Schlegel - Wildeck’s Director of Marketing.  “The units are extremely affordable and provide effective protection in high-traffic loading areas.”

Wildeck’s new Trackgard™ door track protectors feature a vivid black safety stripe on a durable bright yellow polyurethane paint finish that both reduces wear and increases visibility.  When properly anchored, these strong structural steel protectors deflect impacts from both the front and sides with equal resistance.  According to Wildeck, Trackgard™ units are available from stock in both 24-inch or 36-inch heights and are easily installed to provide a safer, more efficient loading dock environment. 

Wildeck dealers nationwide, and specific industrial product catalogs, offer a complete line of quality Wildeck® safety guarding products including loading dock gates, several mezzanine safety gates, safety ladders, Wilgard® guard rail, and other facility safety products.  Manufacturing operations, distribution centers, third-party logistics centers, warehouses, and storerooms all have areas that can be protected with these products.

(cont.)

Wildeck Introduces New Trackgard™ Overhead Door Track Protectors - page 2:

Wildeck, Inc. - based in Waukesha, WI - is the largest manufacturer of mezzanines, vertical lifts (VRCs), and safety guarding products in North America.  Wildeck products are used for the safe and efficient handling, storage, and protection of materials and personnel.  For more than 30 years, the company has grown through a dedicated and experienced network of customer-service-oriented dealers and systems integrators, nationwide.

BETHLEHEM, PA. A new Bulk Bag Weigh Batch Eductor System loosens bulk solid material that has solidified during storage and shipment, discharges the material by weight, and blends it into a liquid stream.

            The skid-mounted system incorporates two Bulk Bag Unloading Frames, each with an integral Bulk Bag Conditioner comprised of a hydraulic pump and two rams with contoured end plates that press opposing sides of bulk bags. The unloaders' cantilevered hoists and motorized trolleys allow conditioning of bulk bags at various heights, as well as loading and unloading of bags without the need for a forklift. Safety interlocks disallow operation of the conditioner when the unloaders' doors are open.

            Integral configuration of the conditioner eliminates the time, labor and equipment needed for separate loading of bulk bags into a stand-alone conditioner, while consuming significantly less floor space than two separate pieces of equipment and reducing capital cost, according to the company.

            The unloaders also feature a Spout-Lock^â clamp ring that forms a high-integrity seal between the clean side of the bag spout and the clean side of the equipment, while a Tele-Tube^â telescoping tube maintains constant downward pressure on the clamp ring and bag spout, elongating the bag as it empties to promote complete discharge.

            Immediately above the clamp ring is a Power-Cincher^â flow control valve employing a series of curved, articulated rods that cinch the bag spout concentrically, allowing dust-free retying and removal of partially-empty bags.

            The unloaders' surge hoppers are equipped with the company's flexible screw conveyors that gravimetrically feed bulk solids into a central solid-liquid eductor that blends the material into a liquid stream in variable ratios set by the user.

            Other equipment manufactured by the company includes bulk bag fillers, pneumatic conveying systems, manual dumping stations, drum and box dumpers, multi-ingredient weigh batching systems, and automated plant-wide systems integrated with new or existing processes.

            For information contact Flexicon Corporation, 2400 Emrick Blvd., Bethlehem, PA

Minneapolis, MN--October 8, 2009--Boker's, Inc., announces its free 2010 Scheduling Calendar and Metric Conversion Chart. As an industry leader in stampings and non-standard washers and spacers, Boker's designed the 2010 calendar to serve as a one-page scheduling tool--complete with an easy-to-use metric conversion chart on the back.

Boker's 2010 Scheduling Calendar spans 15 months, with Sundays and holidays conveniently marked in red. Also, the handy metric conversion chart includes the decimal and millimeter equivalents for common measurements, including 1/64 to 1 inch, plus inch equivalents for measurements from .1 to 100 mm.

With over 90 years of experience, Boker's offers over 24,000 flat non-standard washer sizes with no tooling charge and 2,000 material options, including low carbon steel sheet, various spring steels, stainless steel, aluminum, brass, copper, and nickel silver. Non-metallic materials such as ABS, acetal, polyester, nylon and PTFE are also available--providing millions of washer possibilities.

Boker's, Inc. is a Woman Owned, ISO 9001:2008 registered manufacturer of high quality stampings and non-standard washers and spacers. To request a complimentary copy of the company's 2010 Scheduling Calendar and Metric Conversion Chart, contact: Boker's, Inc., 3104 Snelling Avenue, Minneapolis, MN 55406-1937; call (TOLL-FREE) 800-927-4377 or visit www.bokers.com.

Edgewood, NY, October 15, 2009 - Qosmedix has added a family of four dispensing powder brushes to its vast inventory of luxury make-up brushes. Made of goat hair, the soft bristles release just the right amount of powder for an even, smooth application. Each comes with a cap to protect the brush head, and has a clear plastic reservoir to display the level of contents inside. To promote your brand, the brushes can be personalized with your company logo.

Description (Parts Shown from Left to Right)

Refillable Dispensing Powder Brush with Clear Cap [30240]; Goat Hair; 2g; 3" Length x 0.85" Diameter

Refillable Dispensing Powder Base with Pump [30288]; 14.5g; 3.5"and Powder Brush Tip with Clear Cap [30287]; Goat Hair; 3"

Refillable Dispensing Powder Base [30286]; 16.4g; 3" and Powder Brush Tip with Black Cap [30285]; Goat Hair; 3"

Refillable Dispensing Powder Brush with Black Cap [30283]; Goat Hair; 5g; 4.4" and Black Base Closure [30284]; 0.3"

Qosmedix is an ISO 9001:2000, ISO 14001 certified global supplier to the cosmetic, skin care, spa and salon industries. Founded on the concept of maintaining hygienic practices during beauty consultations, the company has expanded to provide an array of high quality products that offer convenience and value to its customers. The vast inventory includes brushes, swabs, applicators, disposable spa wear, jars, bottles and more. For assistance with sample requests, orders or customization inquiries, please contact a Customer Specialist by phone: +1 (631) 242-3270, fax: +1 (631) 242-3291, or e-mail: info@qosmedix.com. Ask to receive the latest catalog, or visit qosmedix.com to view the complete product line. Qosmedix is a division of Qosina, a leading international supplier of components to the medical and pharmaceutical industries.